by Stefan Ziegler | May 10, 2015 | ETAG 001, FAQ / Knowledge Base
FEM calculation: Under the provision that a valid design result is present, a profile was selected and at least one anchor is tension loaded, you can use this function to determine the required base plate thickness according to the Finite Element Method (FEM)....
by Stefan Ziegler | Apr 15, 2015 | FAQ / Knowledge Base
3D Anchor Design The 3D-Model shows your application including concrete component (base material), attachment, anchor layout, profile and loads. Based on this information a design is carried out for the selected anchor in real time at any change of the entered data...
by Stefan Ziegler | Mar 14, 2015 | DesignFiX On Tour
A huge success! Fastener Fair Stuttgart 2015 ended with a further increase of visitor numbers by 4%. A total of 11,060 visitors came to Stuttgart to discover the latest trends and products from all areas of fastener and fixing Technology. The Fastener Fair Stuttgart...
by Stefan Ziegler | Feb 9, 2015 | FAQ / Knowledge Base
Design method according to ETAG 001 + TR 029 The anchor design in DesignFiX is based on the European Technical Guideline published by the EOTA (European Organisation for Technical Approvals: Guideline for European Technical Approval of Metal Anchors for Use in...
by Stefan Ziegler | Jan 15, 2015 | FAQ / Knowledge Base
Proper filtering in DesignFiX: With this function Products you can temporarily filter individual manufacturers or specific product groups. These settings are not permanent and apply only to the current session in DesignFiX (see Permanent settings). This option helps...
